tape-c接口接线图（Tape-C Interface Connection Diagram）

Tape-C Interface Connection Diagram

Introduction

Tape-C is a magnetic tape storage interface used in the 1980s and 1990s. The Tape-C interface is designed to transfer data between a computer and a tape device. This interface became popular due to its high data transfer rates and low cost. In this article, we will discuss the tape-c interface and its connection diagram.

Connecting the Tape-C Interface

To connect the Tape-C interface, you need to have a tape device and a computer with a Tape-C interface card. The Tape-C interface card is a hardware device that provides a physical connection between the computer and tape device. To connect the Tape-C interface, follow the below steps: 1. Turn off both the computer and the tape device. 2. Insert the Tape-C interface card into the computer's expansion slot, which is usually located on the motherboard. 3. Connect the Tape-C interface card to the tape device using a cable. The Cable should be inserted in the Tape-C port of the interface card and the tape port of the tape device. 4. Turn on the tape device, followed by the computer.

The Tape-C Interface Connection Diagram

The Tape-C interface has a 50-pin connector, which is used to connect the Tape-C interface card to the tape device. The Tape-C interface connection diagram is as follows: 1. Pin 1: Ground 2. Pin 2: Ground 3. Pin 3: Ground 4. Pin 4: Ground 5. Pin 5: Ground 6. Pin 6: Ground 7. Pin 7: Ground 8. Pin 8: Ground 9. Pin 9: Ground 10. Pin 10: Ground 11. Pin 11: Ground 12. Pin 12: Ground 13. Pin 13: Ground 14. Pin 14: Ground 15. Pin 15: Ground 16. Pin 16: Ground 17. Pin 17: Ground 18. Pin 18: Ground 19. Pin 19: Ground 20. Pin 20: Ground 21. Pin 21: Ground 22. Pin 22: Ground 23. Pin 23: Ground 24. Pin 24: Ground 25. Pin 25: Ground 26. Pin 26: Ground 27. Pin 27: Ground 28. Pin 28: Ground 29. Pin 29: Ground 30. Pin 30: Ground 31. Pin 31: Ground 32. Pin 32: Ground 33. Pin 33: Ground 34. Pin 34: Ground 35. Pin 35: Ground 36. Pin 36: Ground 37. Pin 37: Ground 38. Pin 38: Ground 39. Pin 39: Ground 40. Pin 40: Ground 41. Pin 41: Ground 42. Pin 42: Ground 43. Pin 43: Ground 44. Pin 44: Ground 45. Pin 45: Ground 46. Pin 46: Ground 47. Pin 47: Ground 48. Pin 48: Ground 49. Pin 49: Ground 50. Pin 50: Ground

Conclusion

In conclusion, the Tape-C interface connection diagram is a simple and easy-to-understand diagram that shows the pin connections between the interface card and the tape device. This interface was widely used in the 1980s and 1990s and was known for its high data transfer rates and low cost. By understanding the Tape-C interface connection diagram and connecting the interface correctly, you can create a successful connection between your tape device and computer.